Technical advice: 021 450 60 70 · Delivery nationwide · Blog

BFT Store
021 450 60 70 Contact

Installation and service for automation details

Product categories
BFT control systems: remote controls, receivers and GSM modules

Control systems

BFT control systems: remote controls, receivers and GSM modules

BFT control systems means the whole chain between the user's hand and the motor: remote controls, receivers, GSM modules, wall keyboards and power plants. When the pieces communicate correctly, the kitchen responds quickly and safely. Instead, a wrong chosen link brings failed orders and complaints.

In short: remote controls KLEIO and MITTO transmit on 433 MHz with rolling code, receivers CLONIX memorize codes, and run the power station.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A well-thought-out chain of command saves the administrator from many problems. Rolling-code remote controls reduce the risk of copying, Clonix receivers increase the number of users, and GSM module eliminates the distribution of remote controls. MIME PAD also brings a fixed command to the wall. At the same time, the appropriate power station closes the chain and executes the order safely. Choose the right BFT control systems from the category control systems.

BFT control systems connect the automation user via radio, telephone or button. Each component has a precise role in the chain. That's why you deserve to understand how they work together before you buy. Category control systems group all these pieces.

Command chain, step by step

First, the user presses a remote control button. Then the transmitter sends a code on 433 MHz. The receiver shall check if it recognizes the code and closes a contact. Finally, the power plant starts the engine after checking the safety.

Therefore, well-chosen BFT control systems remove weak links from this chain. For example, a small memory receiver limits the number of users.

Remote controls: KLEIO and MITTO

BFT remote controls use 433 MHz and rolling code. In other words, the code changes at every click, and copying becomes much more difficult. Range of remote radio controls includes models with 2 and 4 channels.

  • KLEIO B RCA04 R1: Four channels, black casing.
  • MITTO Series, with MITTO 2 and MITTO 4, in black.
  • Version MITTO COOL C2, with 2 channels, for gates and garage doors.

Therefore, choose the number of channels after how many automations you have. For example, with 4 gate control channels, garage door and a barrier from the same device. Thus, BFT control systems with remote 4-channel controls reduce the number of devices in the pocket.

Receivers CLONIX

Many BFT plants have built-in receivers. However, an external receiver helps installations with many users or equipment without a receiver. For example, BFT CLONIX 2E work on 433.92 MHz, 24 V, with 2 channels and 128 transmitter memory. At the same time, the external receiver is mounted in a secure place with good reception.

For large buildings, CLONIX 2E AC U-LINK 230 store up to 2048 remote controls. In addition, accept the U-LINK protocol, with 3 connecting ports. Thus, BFT control systems for blocks or parking spaces grow without changing the receiver. See all models in radio receivers.

GSM modules and wall keyboards

The remote doesn't fit anyone. For example, at a parking lot with hundreds of users, the distribution of remote controls becomes heavy. In that case, GSM BFT module act on the barrier by telephone or SMS. It also stores up to 500 users and includes the housing and the source.

On the other hand, MIME PAD offers a remote wireless wall control with 4 channels. You mount it, for example, by the service door or in the front desk. Both appear in transmit modules. In other words, BFT control systems do not only mean remote pocket controls.

Power station, last link

All orders end up at the power station. It decides if the move starts and how it stops. At the same time, apply pause times and automatic closure. It also stops the movement if the photocells detect an obstacle. For example, THALIA command swing gates 24 V, again PERSEO CBE manage up to 4 Bollards. Therefore, control systems BFT complete includes and suitable plate, of control stations.

How to choose BFT command systems

  • How many users do you have: tens, hundreds or thousands.
  • What control automations, for example gate, garage, barrier or bollards.
  • Where the receiver is: in central or external.
  • How do you want to order, that is through remote control, phone or wall keyboard.

Then check the compatibility of the frequency and protocol. You also keep a record of the stored remotes. So you quickly wipe out a lost device.

Examples of BFT control systems

A house with a strong gate and a garage needs a little bit. For example, a built-in receiver plant and two remote MITTO 4 controls cover both automations. Instead, a block parking lot requires a high memory Clonix 2E AC U-LINK receiver. For occasional visitors, the GSM module resolves access by calling.

At the same time, in a hall with several doors, MIME PAD on the wall offers rapid command to staff. So, BFT command systems are configured for people, not just motors.

Remote controls and BFT receivers: maintenance

The remote controls work on the battery, so the radius drops gradually over time. So, you change the battery when you notice you need to get closer to the gate. Also check the receiver antenna after work on the fence or at the poles. In addition, update the user list upon departure of an employee.

Additional remote controls for BFT automation control

For large families or teams, buy additional remote controls of the same type. Thus, you memorize them directly into the existing receiver, without further modification. On the other hand, the universal remote control CLODUP CD01 copies remote controls with fixed code and rolling code, on 433–868 MHz. However, for a BFT installation we recommend the KLEIO or MITTO remote controls because their compatibility is clear from the manufacturer's records.

Security and personal data

A GSM mode keeps phone numbers, which means personal data. The parking manager therefore manages the list carefully and updates it periodically. The data processing rules appear in the legislation in force. In addition, BFT rolling code control systems reduce the risk of cloning remote controls.

Frequently Asked Questions about BFT Automation Command

Can I add new remote controls without a technician?

Often, yes, through the manual memorization procedure. However, some installations require access to the receiver or the power station.

Which receiver do I choose for BFT control systems: internal or external?

The internal receiver saves space. In contrast, the external one offers great memory, for example 2048 remote controls at CLONIX 2E AC.

Does GSM module work without signal?

No, because it needs the mobile network. Therefore, you check the cover instead of the mounting. However, you can combine the GSM module with the remote controls, so that access remains possible at any time.

Compose complete BFT control systems in category control systems. The BFT Store team helps you choose, from remote control and receiver to central.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).