
Auto Bollards for auto access: control, power outage, material
An automatic billet for auto access goes up from the pavement and stops unauthorized vehicles, then goes down to command for those who are allowed to enter. It matters how you control it, how you detect the car above and what the column does when the current is missing.
In short: Hydraulic 316L stainless steel, Stoppy B and Stoppy MBB electromechanical, radio controlled and protected with magnetic loop.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
An automatic bolar for auto access works well when all the pieces work together: the column, the central, the radio control, the magnetic loop and the signaling. Choose Pillar B from 316L stainless steel for required access or Stoppy for urban areas and alleys, then carefully check the behavior at the current. For public roads always requires a project. See the models in the category auto columns and ask the advice of the BFT Store team.
An automatic self-access billet controls the entry of vehicles without blocking pedestrians. The column shall be raised normally and shall only descend for approved machinery. In category Automatic columns Find BFT Pillar and Stoppy models, sold individually. So, you can build the right configuration for your entry yourself.
Role of an automatic retractable billar
The classic barrier closes access with a horizontal arm. Instead, the retractable column leaves the pavement clear and physically blocks the passage. Therefore, an automatic car access billet is suitable for historical centres, company courts or private parking. Also, the column does not occupy space above the ground when it lies down. In addition, the raised column physically stops the vehicles, not only warns them.
Automatic BFT column: hydraulic or electromechanical
BFT uses two types of action in this category. For example, Pillar B 275/600.6C LI has a hydraulic drive at 230 V. On the other hand, the Stoppy MBB series uses electromechanical action at 230 Vac. In other words, both variants start from the usual network, but differ by mechanism and maintenance. Thus, an automatic billar for hydraulic car access is often chosen for required access, and the electromechanical for urban areas.
Material and resistance: BFT automatic column
Pillar B 275/600.6C LI uses AISI 316L stainless steel, with a diameter of 273 mm and a wall of 6 mm. Thus, this automatic bolar for self-access resists well to humidity, road salt and weather. Instead, Stoppy B 200/700 has 194 mm diameter and impact resistance of 10000 J. For narrow alleys, Stoppy B 115/500 only 114 mm in diameter and 490 mm in height.
- Stainless 316L best resists in wet or salty environments.
- Painted steel retains a sober appearance next to classic pavements.
- The LED cover increases visibility at night.
What's going on in the blackout?
For any automatic bollards for car access, this question decides many projects. Pillar B 275/600.6C LI card shows that the baller automatically descends in case of power failure. Therefore, ambulances or firefighters may enter even without power. However, some situations call for access to be blocked. In this case, compare the variant cards before ordering. Thus, an automatic billar for car access behaves exactly as the location requires.
Vehicle control and detection
The column receives command from a central, which in turn listens to remote control, card reader or intercom. At the same time, the plant needs to know if a car is standing above the column. For this reason, many installers use a magnetic loop buried on the roadway. For example, BFT SPIRA loop 2x1 m Work with RME 1 BT detectors at 24 V or RME 2 at 230 V. See options in category metal detectors.
In other words, an automatic ticket for car access must never climb under a vehicle. The loop, the photocells and the traffic light greatly reduce this risk.
Signalling and traffic rules
Drivers need to see any automatic bollards for car access before they get to it. Therefore, the LED cap and the traffic light at the entrance play an important role. Also, the markings on the roadway and the indicators announce the controlled area. However, on public roads or in sensitive areas, the final solution shall be established after the project, risk analysis and the requirements of the authorities. General information about road traffic can be found on the website Romanian Police.
Maintenance of an automatic retractable billar
An automatic billar for car access works out, in dust, water and salt. The periodic review is therefore part of the access exploitation plan. First, clean the cap and guide to sand and gravel. Then check the drainage of the foundation box after large rains. In hydraulic models, the installer controls the oil level and the seals. Instead, at electromechanical, check the mechanism and contacts. Thus, an automatic car access billet keeps its speed and safety in time.
Steps of a column access project
- You analyze traffic: how many vehicles enter and who has access.
- Set the number of columns and their diameter.
- Choose command mode: radio, sign or intercom.
- Provide for vehicle detection and signalling.
- Plan the foundation, the drainage and the cable path.
Especially on properties with many users, this order avoids costly changes. In other words, an automatic billar for auto access works well only as part of a coherent plan.
Individual column or kit
The present category contains individual sold columns, useful when you already have the complete project. Instead, Retractable column kits group 1–4 identical units. More, the Stoppy series MBB KIT 219/500 and 219/700 comes in variants with or without LED. You can also combine automatic columns with fixed columns on the same line. In the end, an automatic billar for car access chosen correctly takes into account all entry, not just column.
Frequently Asked Questions about Automatic Bollards for Car Access
Is the column going down by itself?
Pillar B 275/600.6C LI automatically descends, as per the file. However, the behaviour differs from other versions, so check the chosen model.
How do I avoid lifting the column under a car?
Use magnetic loop and detector, such as SPIRA with RME 1 BT. Then, complete with photocells and traffic light.
What diameter do I choose for a private parking lot?
As an automatic billet for car access in a private parking lot, Stoppy B 200/700, with 194 mm, covers many situations. For very required access, take Pillar B, with 273 mm.
Bollards stops and pedestrians?
No, the column blocks vehicles, not pedestrians. However, the distance between the columns must allow people to pass comfortably, including with carriages.
Compare all models in category Automatic columns, after material, height and action. The BFT Store team helps you choose the right automatic baller and control accessories for your entry.












