
Automation BFT: Linear, hydraulic or buried?
A BFT automation gate opens the leaves effortlessly, with remote control or from the app. BFT range includes electromechanical linear operators, hydraulic operators and buried motors. Each type responds to other pillars, other weights and other aesthetic preferences.
In short: the lineer fits most of the gates, the hydraulics of the heavy gates, and the engine buried in the gates where the appearance matters a lot.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
The floating gates differ a lot between them, from easy leaf of 2 meters to heavy gates of 5 meters. Linear operators PHOBOS and KUSTOS cover most of the courtyards, GIUNO hydraulics and ORO take over heavy doors, and ELI VELOCE and SUB remain hidden under alleyways. A well-chosen BFT gate automation starts from the right measurements. Compare the kits, engines and accessories in the category and ask for help from the team.
A BFT automation gate starts with a simple question: where do you mount the engine? On the stake and the leaf, or under the ground. The answer immediately narrows down the list of models. Then follow the length of the cane, weight and working tension.
Three subcategories for swing gates BFT automation
Category swing gate automations group products into three zones. Find Swing automation kits for gate with two leaves. At the same time, swing gates motors sold separately, for replacements or gated with a single leaf. In addition, the Section for Swing automation accessories includes pieces like Wall mount for BFT RADIUS lamp.
Technically, a BFT gate automation uses one of these principles:
- Electromechanical linear operator, with screw, mounted between pole and leaf.
- Hydraulic piston, with pump and oil, for heavy gates.
- Motor buried, hidden in a foundation box under the hinge.
Electromechanical linear operator
Linear remains the most widespread solution for courts and houses. For example, BFT PHOBOS BT A25 work at 24 V, for leavens of 2.5 meters and 400 kg. The engine has a magnetic end-of-race limiter and an opening of 116 degrees.
On the same class of leaves you find and BFT KUSTOS ULTRA BT A25. Thus, a 24 V BFT gate automation allows line stops at the end of the race. For lighter gates, VIRGO SMART BT A 20 covers 2 meters and 200 kg. At the same time, IGEA BT reaches 2.5 meters and 250 kg, and HIDE SW covers 2 meters and 150 kg.
However, the linear operator requires a minimum share between the hynge and the corner of the pillar. Therefore, measure this distance before choosing the model. If the pole has a large width, discuss the buried variants as well.
Automation BFT hydraulic boulders
The hydraulics transmit force through an oil circuit. Therefore, it supports long and heavy canadas well. For example, BFT GIUNO ULTRA BT A50 reaches 5 meters and 800 kg, at 24 V. Instead, ORO E stays at 2.5 meters and 200 kg.
Many hydraulic models have hydraulic locking in the closed position. In other words, the mouths do not yield easily to the wind or to the push. However, an automated hydraulic BFT hydraulic gate requires a careful mounting of the piston and the quotas.
BFT motor for swing collars buried under the alley
Some owners want a clean kitchen, with nothing on the poles. In this case, the engine buried enters a foundation box under the lower rail. For example, BFT ELI VELOCE AC A35 works at 230 V, for 3.5 meters and 500 kg. On the other hand, SUB BT covers 2.5 metres and 800 kg at 24 V.
The buried version, however, requires more preparation. First, you concrete the box to the level of the alley. And then you're gonna make sure the water drains, so the engine doesn't stay in the boat. Therefore, an automated BFT barbed gate is ideally planned before the pavement.
BFT 24 V or 230 V BFT Bracket Automation
The BFT range offers both working voltages. BT models operate at 24 V and AC models at 230 V. The practical differences show as follows:
- The 24 V version offers fine slowing and linear start.
- 230 V engines have simple construction and tolerate longer cables.
- The intensive traffic generally favours BT operators in the BFT range.
Therefore, choose the voltage after the frequency of use. In addition, it takes into account how often the current falls in the area. A 24 V BFT Battant Gate Automation accepts a backup battery according to the power station record.
Accessories that complete the system
The engine alone doesn't make a complete system. You need unified control, radio receiver and remote controls. Then add photocells on the pass and a flashing light on the pole. For example, the BFT RADIUS lamp is caught on the wall with the dedicated support from the accessories subcategory.
- The photocells stop throats when someone enters the moving area.
- Flashing light warns passers-by before starting.
- The remote controls and receiver allow remote control.
Therefore, a BFT gate automation works safely only with the right accessories.
How to choose a proper BFT BFT gate automation
First measure the width of each leaf and estimate the weight. Then check whether the claws move easily manually, without friction. Weary balamals tire out any motor. At the same time, note whether the kitchen opens to the inside or the outside.
A complete kit, like BFT ATHOS AC A40, includes the basic parts for two 4 meter leaf. Thus, an automation BFT gate in the kit greatly simplifies the order. Technical rules for automatic gates are standard, and the national body appears on the site ASRO.
Frequent errors at gates
- The choice of engine only after length, without weight.
- Mounting on weak pillars, which flexes at each race.
- Lack of mechanical shutdowns on opening and closing.
In other words, any BFT motor for battling collars lasts a long time just on a healthy collar.
Frequently Asked Questions about Swing Gates BFT Automations
Is an automation BFT gate on a gate that opens outwards?
Usually yes, but the assembly differs. Therefore, it requires a quota evaluation before ordering.
Can I automate a single leaf?
Yeah. In this case, you control an motor separate from the motor subcategory. Then add the central and accessories.
What do I choose for five-meter leaf?
You need a model for long leaf, for example, GIUNO Ultra BT A50. However, check the actual weight of the portion.
See all solutions in category swing gate automations. The BFT Store team helps you choose the right BFT gate automation for your portion, with the right accessories.












