Technical advice: 021 450 60 70 · Delivery nationwide · Blog

BFT Store
021 450 60 70 Contact

Installation and service for automation details

Product categories
Automatic barrier arm: lengths, BFT series and catch accessories

Automatic barriers

Automatic barrier arm: lengths, BFT series and catch accessories

An automatic barrier arm physically closes the passage and represents the most visible part of the system. Its length depends on the width of the road, and the profile must correspond to the body of the barrier. BFT offers round, rectangular and aluminum arms, from 3 to 6 meters, plus fastening accessories.

In short: choose the arm after length and after the body of the barrier, then add the dedicated fastening system and reflective labels.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

The right arm takes into account the width of the road, the body of the barrier and the wind conditions. AT3 and AQ5 serve the MOOVI and GIOTTO barriers, ATM30 works with MAXIMA 30, and BOOM PS50 and PS60 cover side passes. Do not forget to fix the dedicated and reflective labels. It then periodically controls the alignment and condition of the bands. Now choose the automatic barrier arm from the category of mechanical accessories, and the BFT Store team helps you choose.

An automatic barrier arm looks like a simple piece, but its choice influences the safety and lifespan of the barrier. A too long arm forces the engine, and a too short one leaves the partial passage open. Therefore, the length and profile must correspond exactly to the body of the barrier.

Category mechanical accessories Find BFT arms and supporting pieces. Below we explain how you read the codes and what combinations work.

What role does an automatic barrier arm have?

The arm physically blocks the passage and visually signals the state of access. The body of the barrier lifts it and descends it through an axis and a balancing system. Therefore, the weight and length of the arm counts directly for the motor.

  • Clearly delineate the access tape.
  • Provides support for reflective bands and lights.
  • Absorbs, through rubber profiles, easy contact with vehicles.

So, an automatic barrier arm is part of the system, it's not just an accessory.

Arms for MOOVI and GIOTTO

The MOOVI and GIOTTO barriers use dedicated arms, with lengths of 3 or 5 meters. Model BFT AT3 has a round profile and length of 3 meters. Instead, BFT AQ5 It'll be five yards.

The bodies of these barriers also have clear limits. For example, MOOVI 30 and MOOVI 30S work with arms of 3 meters, and MOOVI 60 accepts arms of 6 meters. Also, GIOTTO BT A 30 U serves arms of 3 meters.

For rectangular arms of 3 or 5 meters, the manufacturer offers the OMEGA AQ installation package. Thus, fixing to the barrier body remains solid and aligned. In conclusion, an automatic barrier arm for MOOVI or GIOTTO comes along with its specific catch.

ATM30, BFT barrier arm for MAXIMA 30

Arm BFT ATM30 measure 3 meters and use aluminum with reflective sheets. However, the manufacturer states that it does not include rubber lights and protections. Therefore, you order them separately if the installation requires them.

For the assembly on the MAXIMA 30 barrier, BFT proposes the OMEGA AT fixing system. Also, the light on the arm comes from ATM LIGHT kits, presented in category Electrical accessories.

BOOM PS: automatic barrier arm for wide crossings

When the road has a large width, you need arms 5 or 6 meters. Model BOOM PS50 measures 5 meters, and BOOM PS60 It'll be 10 feet away. Both use aluminium, reflective strips and rubber protection, without lights.

To combine the arms in this series, BFT offers PS JOINT. In other words, you have a suitable automatic barrier arm for access to trucks or industrial entrances.

Influence of the wind on long arms

An arm of 6 meters offers a large surface of contact with the wind. Therefore, we recommend sizeable barrier bodies for that length. For example, BFT indicates for MAXIMA 60 arms of 4–6.4 metres.

For the purposes of this Regulation, the following definitions apply:

The arm needs parts that securely bind it to the body of the barrier. In addition, his visibility matters at night and in bad weather.

  • The ACC MCL ATT system fixes the arms ATT 704 and ATT 706.
  • The ACTR package contains 12 additional reflective labels.
  • The DIMA PRO36 foundation board anchors the MAXIMA ULTRA 36 barrier.
  • Crown RGB cover adds RGB lights to MAXIMA ULTRA 36 body.

At the same time, any automatic barrier arm periodically checks the grip screws and the condition of the rubber profile.

How to choose the right automatic barrier arm

First, measure the actual width of the passage from the barrier pillar to the opposite support. Then identify the exact pattern of the barrier body. Then, choose the length of the arm from the range indicated for that body.

  • Width up to 3 metres: AT3 or ATM30, after body.
  • Pass of 5 meters: AQ5 or BOOM PS50.
  • Entrance of 6 meters: BOOM PS60, with a suitable body.

For compatible bodies, see Barrier bodies. Installation in workspaces follows the general security rules presented by European Agency for Safety and Health at Work. The final solution shall be established after the project and the site risk analysis.

Maintenance of an automatic barrier arm

The arm works outdoors, in the sun, rain and ice. That's why his condition changes over time, even if the barrier works normally. First, check if the arm is horizontally in the closed position. Then watch if he climbs and comes down without any squeaks.

  • Clean the reflective strips, because the dust reduces their visibility.
  • Replace damaged labels, e.g. with the ACTR package.
  • Control the rubber profile on the lower side.
  • Press the screws in the fixing system according to the manual.

At the same time, an automatic barrier arm hit by a vehicle can remain easily deformed. In this case, the barrier balance changes and the engine works harder. Therefore, after any impact, it requires a verification of the arcs and alignment. Thus, avoid premature wear of the barrier body.

On the other hand, winter is worth checking if the ice does not block the arm in the down position. An automatic ice-covered barrier arm gets harder and puts pressure on the mechanism. So, clean it before the first cycles of the day, especially at the early entries.

Frequently Asked Questions: Automatic Barrier Arm

Can I shorten an automatic barrier arm?

Some arms allow cutting, but the balance of the barrier needs to be re-established. Talk to a plumber first.

What do I do if my arm breaks?

Control the same model and compatible fastening system. Thus, the body of the barrier remains balanced correctly.

Does the arm include lights?

No, at ATM30, BOOM PS50 and BOOM PS60 lights are commanded separately.

Find all arms in category mechanical accessories and choose the automatic barrier arm after the body and width of the passage. The BFT Store team helps you check compatibility and fixation.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).