
BFT accessories for automatic gates: what you need and why
BFT accessories for automatic gate complete the motor safely, signaling and control: photocells, lamps, rack gear, antenna, detectors and modules. Without them, even the best motor works incompletely. Therefore, it is worth choosing them with automation, not after assembly.
In short: the photocells protect, the lamp warns, the rack gear transmits the movement, the antenna increases the radius, and the detectors read the vehicles.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A complete installation means more than a good motor. The AKTA or ERIS photocells stop the obstacle movement, the RADIUS lamp warns passersby, and the CVZ rack gear transmits force to the back doors. In addition, the AEL 433 antenna and the RME detectors resolve the special situations. The CVZ rack rack also supports gates up to 1000 kg. Find BFT accessories for automatic gates in category automation accessories.
BFT accessories for automatic gates turn an motor into a complete and safe installation. Some become mandatory in practice, others bring comfort. In this guide we go through the subcategories of automation accessories, with concrete examples.
Photocells, first accessories for automatic gates
The photocells create an invisible beam over the passage. When an obstacle interrupts it, the power plant stops or reverses the movement. That's why almost any correct installation includes them. You find them in Safety photocells.
- BFT AKTA A30: 30 m radius, 180° horizontal and 20° vertical adjustment.
- Set BFT ERIS A30: wireless, 30 m, accept safety margins.
- COMPACTA-PHP kit: COMPACTA A20-180 photocells and 522 mm aluminium poles.
- Model THEA A15 O.PF UNI: Universal, for example for non-BFT automations.
So, BFT accessories for automatic gates almost always start with a pair of photocells. Wireless version helps where you can't pull cable across the alley.
Signalling lamp
The lamp warns that the gates are going to move. Thus, pedestrians and drivers have time to react. For example, BFT RADIUS B LTA 24 Work at 24 V and have built-in antenna. For 230 V installations, range includes BFT B LTA. At the same time, choose the lamp after the voltage of the power plant, e.g. 24 V at THALIA or ZARA BT L2. See signalling lamps.
In addition, the wall holder for RADIUS solves the assembly when the gate pole is too small in width. You find him in various accessories BFT, with the AEL 433 antenna. Therefore, BFT accessories for automatic gates this way solves mounting problems, not just on operating ones.
Rack gear: accessories for automatic sliding
At the back doors, the engine pushes the sheet through the pinion and rack gear. Gear rack BFT CVZ 1 m long, 30x12 mm section and module 4. At the same time, it supports gates up to 1000 kg. Therefore, you order as many meters as the gate sheet has, plus a small reserve. See Gear racks.
In other words, at a sliding gate, BFT accessories for automatic gates include mandatory gear rack suitable for pinion.
BFT accessories for automatic gates: antenna and detectors
The remote control beam drops when the power plant is in a metal box or behind the wall. In that case, antenna BFT AEL 433, with 4 m of cable, move the reception point above. Thus, the command becomes more stable. Also, the external antenna helps at the long gates, where users start the command from afar.
On the other hand, the RME detectors and the SPIRA loop read the vehicles, especially at parking gates and barriers. You find them in Metal detectors. Also, BFT accessories for automatic gates used by many users often include a loop for opening at exit.
Universal accessories
Category various accessories collect products without BFT mark, for control and signalling. For example, the WIFI-Click WF01 module adds command from your phone via Wi-Fi. The GSM RTU5025 also stores up to 999 users. Remote control CLODUP CD01 copies remote controls with fixed code and rolling code, on 433–868 MHz. However, for a new installation, you first choose BFT accessories for original automations, as their compatibility is clear from the technical records.
Swing gates or sliding: what's different
At a swing gate, the basic accessories remain the photocells and the lamp. In addition, long sheets may require an electrical lock, controlled by the power plant. Instead, at a sliding gate add rack gear and often a pair of photocells on the inside. On the other hand, you add the magnetic loop and the RME detector to the parking doors, especially when many cars pass. So, the accessories for automatic gates differ by type of opening.
What accessories do you choose, in order
- First, a pair of photocells, for safe passage.
- Then a flashing light, visible in both directions.
- At sliding gates, rack gear on the entire length of the sheet.
- Optionally, an external antenna, if the range of the remote controls does not reach.
- For parking, a magnetic loop detector.
In other words, BFT accessories for automatic gates are chosen according to the type of gate and traffic. However, the photocells and the lamp remain the basis of any installation.
Common errors
Some owners just buy the engine and postpone the rest. Then discover that the claws start without warning or do not stop at the obstacle. Also, a rack-mounted gearbox tightens the pinion and uses the engine. Therefore, you plan the accessories from the bidding stage. In addition, some photocells get mounted too high, and low obstacles go unnoticed. At the same time, a lamp hidden behind the pole no longer warns anyone.
Assembly: BFT accessories for automation
After assembly, test each accessory separately. For example, interrupt the beam of the photocells during closure and track the reaction of the gate. Then you check the lamp every cycle. Technical requirements for motorized gates meet the standards published by ASRO. So, a qualified plumber gets it started.
Maintenance: accessories for automatic gates
Photocell lenses collect dust and spider webs. You therefore delete them periodically, especially in the autumn. Also, clean the rack rack rack and check her catch on the sheets. Finally, you test the lamp and the remote control batteries at each revision.
Frequently Asked Questions about Automatic Gate Accessories
Do BFT photocells go on other motors?
The THEA A15 O.PF UNI set also covers non-BFT automations. However, you check the power supply, usually 24 V.
Do I need an external antenna?
Unless the radius stays weak. The RADIUS lamp already has a built-in antenna, so sometimes the problem disappears without another accessory.
How many rack racks do I order?
As long as the length of the sheet, in pieces of 1 m, plus an established reserve with the installer.
Complete installation with BFT accessories for automatic gate category automation accessories. The BFT Store team helps you choose, depending on the motor, type of gate and traffic.












