Technical advice: 021 450 60 70 · Delivery nationwide · Blog

BFT Store
021 450 60 70 Contact

Installation and service for automation details

Product categories
BFT CLONIX radio receiver: how to choose the right option

Control systems

BFT CLONIX radio receiver: how to choose the right option

A BFT radio receiver receives the signal of the remote controls and transmits the command to the gate or barrier central. It matters when the plant does not have a built-in receiver, when you have many users, or when you want to order another BFT remote control brand automation.

In short: CLONIX 2E Universal works at 24 V with 128 codes, and U-LINK variants at 230 V store up to 2048 remote controls.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A suitable BFT radio receiver depends on the voltage available, the number of users and how many separate orders you want. CLONIX 2E covers 24 V and up to 128 remote control units, and U-LINK variants at 230 V reach 2048 codes with one or three exits. Mount the receiver up and use the external antenna when the signal weakens. See the models in the radio receiver category and ask the advice of the BFT Store team.

A BFT radio receiver listens to the 433 MHz frequency and recognizes the stored remote controls. When you receive a valid code, close a contact that gives the control of the plant. In category radio receivers find three models in the family CLONIX, with different power supplies and memories.

When you need an external BFT radio receiver

Many BFT plants have built-in receiver or slot for one. However, there are situations where an external receiver better solves the problem.

  • The plant has no receiver or memory too small.
  • Automation comes from another manufacturer, but you want remote BFT controls.
  • You need more exits, for example for doors and light.
  • The signal goes weak to the power station, and the receiver needs to be moved up.

For example, a parking barrier with hundreds of subscribers easily exceeds the memory of a home receiver. In this case, a high memory BFT radio receiver solves the problem without changing the barrier. So the external version adds flexibility without changing the center.

CLONIX 2E, universal 24 V BFT receiver

BFT CLONIX 2E work on 433,92 MHz and feed to 24 Vac or Vdc. It has 2 channels, maximum current on 1 A relay and memory for 128 transmitters. The housing also has IP44 protection and measures 162 x 68 x 39 mm. This BFT radio receiver is therefore suitable for homes and courtyards with few users.

The fact that they feed at 24 V means a lot. Most low voltage power plants offer a 24 V output for accessories. Thus, the assembly does not require a separate source.

BFT external receiver with U-LINK at 230 V

For buildings with many users, memory becomes the main criterion. CLONIX 2E AC U-LINK 230 store up to 2048 remote controls and power up to 230 V. In addition, compatibility with the U-LINK protocol, through 3 connecting ports, opens the way to additional BFT accessories.

CLONIX UNI with three outputs

CLONIX UNI AC U-LINK 230V add a third exit. Two exits have NO contact, and the third one is set to NO or NC. In other words, a single BFT radio receiver commands gates, a barrier and, for example, a yard light. Memory remains all of 2048 remote controls.

How to choose a suitable BFT radio receiver

First, check the voltage you have available near the assembly site. Then, count current users and those who may appear in time. Finally, think how many separate orders you want.

  • For a 24 V power station house, CLONIX 2E usually arrives.
  • A block or a company parking lot requires large memory, so the U-LINK version.
  • Three separate commands on the same receiver lead to Clonix UNI.

Therefore, a BFT radio receiver chosen according to these three criteria does not require you to switch equipment later.

Connecting the receiver to the power station

The external receiver needs power supply and a link to the control input. First, connect the correct feed: 24 V to Universal CLONIX 2E or 230 V to U-LINK variants. Then, you set the receiver off at the start of the power plant, usually noted START or step by step. In addition, in models with multiple outputs, you allocate one output for each command. However, it respects the maximum current on the relay, which in Clonix 2E reaches 1 A. Thus, a correctly connected BFT radio receiver works stable.

Assembly and range of action

The position of the receiver directly influences the range of the remote controls. For example, a metal box or a thick wall reduce the signal. Therefore, a BFT radio receiver is best up, away from large masses of metal. If the receiver sits down, use antenna BFT AEL 433, which comes with 4 meters of cable. At the same time, it holds the signal cables separately from the force cables. For information on electrical equipment standards, please consult Standardisation Association of Romania.

Compatible remote controls

The CLONIX receivers work on 433 MHz, as do the BFT remote controls in category remote radio controls. For example, BFT MITTO 2 use rolling code and 2 channels. Instead, for the plant itself, see the models in control stations. Thus, a BFT radio receiver completes the system without incompatible parts.

Frequent problems and how to solve them

Most problems are signal, memory or power.

  • The beam drops sharply: check the remote control battery and antenna position.
  • A new remote control does not respond: repeats the storage procedure in the manual.
  • Full memory: delete the old remote controls or switch to a 2048 version of codes.
  • No response: check the supply voltage of the receiver.

Most of the time, a BFT radio receiver does not fail, but receives a weak signal. Therefore, always start with antenna and battery verification. At the same time, note how many codes you memorized, so you know when the boundary is approaching.

Frequently Asked Questions about BFT Radio Receiver

How many remote controls does Clonix 2E store?

As a radio receiver BFT of the 24 V, CLONIX 2E memorize 128 by transmitters. Instead, the U-LINK variants to 230 V reach 2048.

Can I use the receiver on an automation of another brand?

Yes, Clonix 2E appears as a universal BFT radio receiver. However, check the control input and the voltage available on the power plant.

What does NO and NC contact mean?

NO remains open at rest and closes to command. Inversely, the CN remains closed in rest and opens to order.

Do I need an external antenna?

Not always. However, when the receiver sits down or in a metal box, the AEL 433 antenna with 4 metres of cable helps the reception.

Compare the three models in the category radio receivers, after feeding, memory and number of exits. The BFT Store team helps you choose the BFT radio receiver according to your power station and remote controls.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).