
BFT Sectional Door Motor: Botticelli Smart or ARGO for your garage
A BFT sectional door motor turns the garage door into a remote control system with controlled start and stop. The correct choice is based on the weight of the door, its surface and the frequency of use. The BFT range covers both the garages and the larger doors in workshops and warehouses.
In short: Botticelli Smart covers home garages up to 120 kg, and ARGO takes the industrial doors of 20–35 sq.m., both operating at 24 V.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
An motor chosen from the actual data of the door works quietly and does not force the mechanism. Botticelli Smart BT A 850 and BT A 1250 match the home garages, and ARGO BT A 20 and BT A 35 answer the large doors in workshops or warehouses. Complete the installation with the right rail and photocells. Also check the space below the ceiling before ordering. See now each BFT sectional door motor in our category and ask the advice of the BFT Store team.
A BFT sectional door takes on the task of lifting the panels and turns it into a linear, remotely controlled movement. However, the models in the category Sectional door automations differ in strength, covered surface and type of use. Therefore, it is worth understanding what each figure in the name means before you choose.
In this guide we compare the four BFT motors in the store. Then we explain the role of the weight and the surface of the door and show which accessories complete the installation. We also answer the questions we often receive from customers.
How a BFT sectional door motor works
The sectional door climbs on the side rails and sits under the ceiling, in articulated panels. The engine is attached to the ceiling, and a central chain rail pulls the trolley connected to the top panel. Thus, the door opens vertically and does not occupy space in front of the garage.
At a BFT sectional door motor, the control unit and the race limiter are in the motor body. In other words, the motor knows where it stops up and down without repeated mechanical adjustment. In addition, 24 V operation allows for smoother start and stop.
- The chained track transmits the movement to the door.
- The race limiter stops the door in the final positions.
- The radio receiver receives control from remote control.
- Manual unlocking allows opening when the current is missing.
Botticelli Smart for the home garage
The Botticelli Smart series represents the BFT sectional door option for most residential garages. Model BOTTICELLI SMART BT A 850 work with doors up to 80 kg and an area of 13 square meters. So, it fits into a regular garage for a car.
For larger or heavier doors, version BOTTICELLI SMART BT A 1250 offers a force of 1250 N. It lifts doors up to 120 kg, with a useful surface of 16 square meters. At the same time, the manufacturer describes it as a solution and for very intensive use. For example, a common garage of a building with several tenants benefits from this force reserve.
What do the denomination figures mean?
Code number indicates motor force in newtons: 850 or 1250. The maximum door weight and the useful surface appear separately in the product file. However, do not choose only after force. First, check whether the arches balance the panels correctly, because a BFT sectional door motor works optimally only on a well-balanced door.
ARGO, BFT sectional door motor for large spaces
When the door exceeds the dimensions of a garage, the ARGO series comes into discussion. Model ARGO BT A 20 Covers sectional doors up to 20 square meters. Instead, ARGO BT A 35 climb up to 35 square meters and develop a force of 800 N.
Both operate at 24 V, with 230 V power supply. They also include the LCD display control unit and self-learning functions. The receiver, flashing light and encoder for the race heads are all part of the package. Therefore, a BFT sectional motor in the ARGO series brings almost everything you need for a workshop, a car service or a small warehouse.
For very large door locks or heavy traffic, BFT proposes PEGASO operators at 230 V and 400 V. You find them in the industrial lockdown area of the store.
How to choose a BFT sectional door motor in four steps
The choice becomes simple if you start from the door data, not from the motor. Thus, avoid both an undersized motor and one too large for your needs.
- Measure the width and height of the door, then calculate the surface in square meters.
- Find the weight of the door in the documentation of its manufacturer.
- Estimate how many opening cycles you have on a regular day.
- Check the space under the ceiling for rail and motor.
Then compare the figures with the following:
- Garage, door up to 80 kg and 13 sqm: BT A 850.
- Heavy door up to 120 kg and 16 sqm: BT A 1250.
- Workshop with door up to 20 square meters: Argo BT a 20.
- Commercial space with door up to 35 sq m: Argo BT a 35.
In conclusion, a well-chosen BFT sectional door motor works more silently, because it does not force the mechanism to the limit.
Accessories, assembly and safety
The engine doesn't work alone. The chain track sets the useful door race, and its length depends on the height of the gap. Find compatible variants in the category garage door accessories. If you prefer a ready-assembled package, page garage door automation kits gather the engine, track and remote controls.
At the same time, the assembly requires work at heights and electrical connections. For this reason, we recommend an experienced installer, especially at large doors. For general rules on work equipment, you can consult and European Agency for Safety and Health at Work.
An automatic door moves itself, so the area below it must remain free during the race. Therefore, we recommend photocells at the entrance to the garage, which stop the movement at the appearance of an obstacle. In addition, periodically check the bows, cables and rail attachment. Thus, the BFT sectional door engine works under the conditions for which the manufacturer designed it.
Frequently Asked Questions: BFT Sectional Door Motor
Can I mount a BFT sectional door motor on an older door?
Yes, if the door picks up manually and the arches balance it correctly. Instead, a locking door must first be repaired by a specialist.
What's going on at a power outage?
The door opens manually, through the unlocking system. For example, for ARGO BT A 20 the product file shall indicate a hand unlocking strap.
Why does it matter how 24 V works?
The 24 V engines generally allow for smoother start-ups and stops. Moreover, they combine easily with low voltage accessories, depending on the control station.
View all models in category Sectional door automations and compare each BFT sectional door motor with your door data. The BFT Store team helps you choose the right choice for weight, surface and door use.













