Technical advice: 021 450 60 70 · Delivery nationwide · Blog

BFT Store
021 450 60 70 Contact

Installation and service for automation details

Product categories
BFT motor for industrial door: how you read the PEGASO range

Industrial closures

BFT motor for industrial door: how you read the PEGASO range

A BFT motor for the industrial door lifts and descends the sectional doors from halls, warehouses and workshops. The correct choice is based on the surface of the door, the supply and the number of cycles per day. A model too weak is getting tired fast, and a oversized one costs useless.

In short: choose after the door surface (20, 25 or 45 m2), after power supply (230 V or 400 V), then after manual release and control mode.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A BFT motor for the right industrial door starts from simple data: the door surface, the available voltage and the number of cycles per day. The PEGASO range covers doors of 20, 25 and 45 m2, with release on chain or double cable and with deadman variants. For smaller doors, ARGO 24V brings a compact solution with display and receiver. Compare models in the automation category for industrial door sectionals and ask the advice of the BFT Store team.

A BFT motor for the industrial door turns a heavy sectional door into a fast and controlled access. In this guide we explain how you read the codes of the game PEGASO and what it means 230 V or 400 V. So, you get to a suitable model without paying for the power you don't need.

What does a BFT motor do for the industrial door

The PEGASO operator catches directly on the axis of the thorshing arches. The engine therefore rotates the axle and the cables lift the panels on the rails. Range uses an absolute encoder race limiter. In other words, the plant knows at any time the exact position of the door. In addition, the racing heads do not detach from one cycle to another.

A BFT motor for the industrial door works other than a residential garage motor. For example, do not pull the door with a sleigh on the rail, but act the axis. At the same time, his power is expressed by the couple in Nm, not by the traction force in N.

How to read BFT PEGASO codes

Codes seem complicated, but they follow a simple logic. For each BFT motor for the industrial door in the PEGASO range, the figures in the middle show the maximum surface area. Thus, BCJA620 serves doors up to 20 m2, BCJA625 climbs to 25 m2, and BCJA645 reaches 45 m2.

  • The L-letter marks the 230 V power supply, and the W-letter marks the 400 V version.
  • Subfix 01 means chain release, and subfix 02 brings the dual release cable.
  • Group 11 or 12 indicates the functioning of the deadman, that is, the man present.

For example, BFT PEGASO BCJA625L02 combines 25 m2, 230 V and double release cable. Instead, chain variants have IP54 protection, and double cable variants are up to IP55. Therefore, the IP55 version is worth considering next to the ramps exposed to spades.

Couple and speed to a BFT motor for industrial door

Technical data says a lot about the working regime. The models of 20 m2 offer 33 rpm and 50 Nm. On the other hand, models of 25 m2 fall to 24 rpm, but grow the couple to 70 Nm. The 45 m2 variants keep 24 rpm and reach 100 Nm.

Therefore, a BFT motor for the industrial door is not chosen only after the width of the gap. It counts the total surface area, the weight of the panels and the balance of the arcs. If the arcs are tired, any motor works forced. Therefore, check first whether the door remains balanced in the half of the race, operated manually.

230 V or 400 V: which BFT motor for industrial door chooses

The supply depends on the building and the intensity of the traffic. Models L operate at 230 V and cover semi-intensive use. Instead, W models require 400 V triphasic and support intensive use.

  • For a workshop or a car service, a 230 V model usually covers needs.
  • In a storage room with loading ramps, take the 400 V version into account.
  • When the door exceeds 25 m2, only the series BCJA645 of 45 m2 remains.

Thus, a BFT motor for 400 V industrial door, such as BFT PEGASO BCJA645W01, matches the halls with many cycles a day.

Automatic command or deadman

Some doors open next to areas with pedestrians or stackers. In this case, the deadman version becomes a prudent choice. A BFT motor for industrial door in Deadman version only moves while someone holds the button down. Thus, the person in charge is constantly following the door.

Automatic models, instead, close the door alone and require safety devices. For example, mount Safety photocells on the door path and a sensitive margin on the bottom panel. However, the final configuration results from the risk analysis of each location.

Complete kit or BFT PEGASO operator separately

The store also has variants in the kit for those who start from scratch. For example, BFT PEGASO UP 400V kit It serves doors up to 45 square meters, with intensive traffic. For smaller doors, BFT ARGO 24V work at 24 V and develop a force of 550 N.

At the same time, ARGO includes control unit with LCD display, receiver and flashing light. Therefore, a BFT motor for the industrial door delivered in the kit reduces the number of parts to be ordered separately. On the other hand, the separate motor matches when you already have central, remote controls and accessories.

Frequent errors in choice

  • The calculation on width, without height, leads to an underestimated surface.
  • Ignoring the available feed blocks the assembly of a 400 V model.
  • Unverified bows shorten the life of any operator.
  • The lack of affordable release complicates the evacuation to the power outage.

Thus, note the dimensions, the tension in the painting and the daily traffic before ordering. With these data, choose a BFT motor for the industrial door from Industrial door sectional automations No hesitation.

Installation of a BFT motor for industrial doors

The assembly requires an electrician and a door technician. First, they check the arches, the cables and the tracks. Then attach the engine to the ax and set the racer through the encoder. Finally, test the reversal of the obstacle and manual release.

The automatic door is part of the building's working equipment. Therefore, the rules of work security also matter here. Find general information on the site Labour Inspectorate. If you have folding doors, see the range of folding door automations.

Frequently asked questions: BFT motor for industrial door

Can I open the door manually to the power outage?

Yeah. The PEGASO range has release with chain or double cable. So, you lift the door manually from the inside.

Which BFT motor for industrial door do I choose for 30 m2?

Over 25 m2 you need the BCJA645, designed for 45 m2. But this requires 400 V power.

What does deadman at PEGASO mean?

The door just moves while you hold the button. In other words, there is no automatic closure.

Is the engine going on an older door?

Usually yes, if the arches and the tracks look good. However, it requires first a balance check.

View all models in category Industrial door sectional automations. The BFT Store team helps you choose a BFT motor for the industrial door according to the surface, power supply and traffic in the hall.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).