Technical advice: 021 450 60 70 · Delivery nationwide · Blog

BFT Store
021 450 60 70 Contact

Installation and service for automation details

Product categories
BFT motor for rearward facing: from Deimos to SP3500

Sliding gate automation

BFT motor for rearward facing: from Deimos to SP3500

A BFT motor for sliding necks is chosen first after the weight of the gate sheet and after how often it opens. It matters because the BFT range covers gates from 400 kg to 3500 kg, 24 V, 230 V or 400 V triphasic, with different electronics and speeds.

In short: Deimos covers up to 600 kg, Ares up to 1500 kg, Icaro 2000 kg, and the SP3500 triphasic series leads to gates up to 3,500 kg.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

Start from the actual weight of the sheet and the number of cycles per day. Deimos covers the residential gates of 400–600 kg, Ares climbs to 1500 kg at 24 V, Icaro leads 2000 kg at 230 V, and SP3500 serves the three-phase gates of 3500 kg. Choose rack gear and safety accessories with the engine. See all the variants in the category sliding motors gates and ask the advice of the BFT Store team. Careful mounting on a well-adjusted gate makes the difference over time.

A BFT motor for sliding claws moves the doorway horizontally through the pinion that gears the rack. However, the BFT range from category motors sliding gates it goes from residential gates of 400 kg to industrial gates of 3500 kg. Therefore, the choice starts from a few concrete data about your gate.

Port weight and choice of a BFT motor for sliding gate

The weight of the sheet determines the motor family. First, find out the actual weight, from the project or from the one who built the gate. Then add a safety margin, especially if the gate has full panels that catch wind. Therefore, a BFT rear-facing gearbox motor works more quietly when it does not work at the capacity limit.

  • Up to 600 kg: Deimos series, 24 V or 230 V.
  • Between 1000 and 1500 kg: Ares series, 24 V.
  • The 2000 kg: Icaro, the 230 V.
  • For 3500 kg: SP3500 series, triphasic.

Deimos: BFT motor for residential stilting

We give BT A400 accept gates up to 400 kg and work at 24 V. Version We gave BT A600 climbs to 600 kg at a speed of 12 m/min. The Deimos cards also mention magnetic end-of-race limiter. In addition, the Deimos ULTRA BT series offers the same capacity of 400 and 600 kg.

24 V or 230 V at Deimos

Deimos AC A600 works at 230 V and takes all 600 kg. In contrast, the 24 V BT variants generally allow fine speed adjustment and linear start. In other words, both variants change the same weight, but differ by electronics and behavior. In this case, a plumber will tell you which BFT motor for stilettos matches the frequency of use. At the same time, the Deimos ULTRA BT kit accepts the Wi-Fi EBA module through the U-Link protocol.

Ares and Icaro: BFT automation for heavy sliding

For gates between 1000 and 1500 kg, the Ares series brings two models to 24 V. BT A1000 takes sheets up to 1000 kg, and Ares BT A1500 climbs to 1500 kg. Thus, a BFT motor for 24 V sliding gates covers and large gates of yard or firm.

At 2000 kg, the Icaro series is staged with the Icaro SMART AC A2000 and Icaro ULTRA AC A2000 models. Both work at 230 V. Icaro therefore fits the heavy gates of logistics parks, halls or industrial courts. Especially there, a BFT motor for sluggish necks has to cope with many cycles a day.

SP3500: triphasic for 3500 kg

As a BFT motor for very heavy sliding gate, the SP3500 series leads up to 3500 kg. SP3500 TRI 400 works at 400 V triphasic. There are also options SP3500 SF TRI 400 and SP3500 TRI 230. However, before ordering, check what type of three-phase power supply you have on the site. In this case, the electrician confirms whether the network supports the chosen engine.

Frequency of use and BFT automation for sliding gate

Two gates with the same weight can request different motors. For example, a house gate opens a few times a day. Instead, a warehouse gate works almost continuously in the work program. Therefore, when used intensively, you choose a model with capacity reserves and a suitable central unit. The Deimos A400 kits, for example, describe them for semi-intensive traffic. So, for an industrial yard, a BFT motor for sliding gate in the Ares or Icaro series offers more reserve. In addition, discuss with the installer the estimated number of cycles per day.

What to check at the gates before mounting

The motor doesn't correct a broken gate. First, check whether the wheels run freely on the rail. Then, control the top guide, which holds the vertical sheet. At the same time, the mechanical stoppers at the head must exist, even if the motor has a limiter. In the end, a BFT rear-facing gearbox motor mounted on a well-adjusted gearbox works with less effort.

Rack and slide gear: the basis for good automation

Any BFT motor for sliding necks depends on rack gear and the path of rolling. For example, BFT CVZ metal rack gear has 1 meter length, 30x12 mm profile, module 4 and supports up to 1000 kg. So, for heavier gates, choose rack gear from the engine file. See all variants in category Gear racks.

  • Check if the claws slip easily without the motor.
  • Clean the trail of stones and ice before winter.
  • Leave a small game between pinion and rack rack, according to the manual.

Safety around a BFT Deimos or Ares motor

The race limiter stops the gates in the final positions. Instead, photocells and safety tapes protect people and cars in the way of the gate. Also, flashing light announces time maneuver. Therefore, it treats any BFT motor for sliding necks as part of a system, not as an isolated part. For information on standards for motorized gates, consult Standardisation Association of Romania. If you prefer everything in one package, see Kits for sliding gates.

Frequently asked questions: BFT motor for sliding

What motor do I choose for a 500-pound gate?

Deimos BT A600 or Deimos AC A600 accept gates up to 600 kg. So, you have a margin for real weight.

How fast is Deimos BT A600?

Product file indicates 12 m/min. Therefore, a gate of 4 meters opens in about 20 seconds.

Do I need triphasic current?

Only for the SP3500 series in the three-phase variants. Any other BFT motor for sliding gate in the range shall work at 24 V or 230 V.

Compare all models in category motors sliding gates, after the weight and power of your portion. The BFT Store team helps you to choose the right BFT engine for sliding claws and accessories.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).