Technical advice: 021 450 60 70 · Delivery nationwide · Blog

BFT Store
021 450 60 70 Contact

Installation and service for automation details

Product categories
BFT motor for battling: length, weight and mounting

Swing gate automation

BFT motor for battling: length, weight and mounting

A BFT motor for battant claws is chosen after the length and weight of each leaf, but also after the shape of the pillars. It matters because the BFT range includes linear, hydraulic and buried motors for leaf from 2 metres to 5 metres, 24 V or 230 V.

In short: Hide and Virgo for 2 m light leaf, Phobos and Kustos for 2.5 m, and Giuno ULTRA takes up to 5 m and 800 kg per leaf.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

For a BFT motor for battling claws, start from the length and weight of each leaf, then check the space on the pillars. Hide SW and Virgo cover the easy 2 meters, Phobos and Kustos dominate the 2.5 meters area, and Giuno ULTRA leads leaves of 5 meters and 800 kg. For a gate without visible arms, choose SUB BT or ELI VELOCE. See all the variants in the category swing gates motors and ask the advice of the BFT Store team. The force rules and manual unlocking are worth checking at each review.

A BFT motor for battant claws opens each leaf by rotating around the swings. Unlike the sliding necks, here it matters a lot the length of the cane, not just its weight. Range of category motor swing gates Covers leaves from 2 meters to 5 meters. Therefore, it is worth knowing exactly what you have before you choose.

What data do you need before a BFT automation for battling collars

First, measure the length of each leaf. Then find the approximate weight, from the design or from the manufacturer. In addition, look at the poles: their thickness and the space behind the swing decide which BFT motor for the bony necks fits. For example, the thin pillars of the pipe require other mounting than the pillars of the building.

  • The length of the can, in meters.
  • The weight of the cane, in kilograms.
  • The desired opening angle.
  • Space available on the pillar and behind the gate.

BFT motor for 2 meters light leaf

For small gates, BFT offers compact models at 24 V. BFT HIDE SW leads leaves of 2 meters and 150 kg. In return, Virgo SMART BT A 20 climbs to 200 kg on the same length. Thus, a BFT motor for battling gates of this type matches pedestrian gates or light yard gates.

Phobos and Kustos: BFT motor for 2.5 m battant collars

The most requested length remains 2.5 meters on the leaf. Here he comes in Phobos AC A25, an irreversible 230 V linear motor for leaven up to 400 kg. Its file mentions included control unit and opening of 120 degrees. The Phobos BT A25 version does the same work at 24 V and has a magnetic end limiter.

Also, KUSTOS ULTRA BT A25 work at 24 V, all for 2.5 meters and 400 kg. On the other hand, IGEA BT accepts 250 kg of the same length. So, at 2.5 meters, a BFT motor for swing gate is chosen especially after weight and tension.

What is an irreversible motor?

A BFT motor for irreversible battling necks keeps the cane locked when it stands off. In other words, the gates do not open by pushing, even without electric locks. However, at long leaf or exposed to the wind, many installers still add an electroyal for stability.

Long and heavy leaves: Athos and Giuno

For large gates, length becomes the critical factor. Athos AC A40 AR accepts 4 meters and 400 kg leavens, and Athos AC A25 AR takes 700 kg to 2.5 meters. Both appear in the right version, so check which side each motor is mounted on. Further, GIUNO ULTRA BT A50 is a 24 V hydraulic motor for 5 metres and 800 kg leaf. Therefore, as a BFT motor for 5 metre battant gates, Giuno remains the logical choice for industrial gates.

Deep-sea motors: no visible arms

Some gates look better without the motor on the pole. In that case, the motor is under the leaf, in a tape in the ground. For example, BFT SUB BT leads leaves 2.5 meters and 800 kg, at 24 V. Instead, ELI VELOCE AC A35 works at 230 V for 3.5 metres and 500 kg. However, a BFT motor for the barbed gate requires very good drainage in the cassette, otherwise water reaches the mechanism.

Manual and power-up unlocking

Any automation must allow the power-free gate to be opened. Normally, BFT engines have a manual unlocking system, with key or handle. However, the position and type of unlocking differs from one model to another. Therefore, ask the installer where the unlock is and exercise the manoeuvre once. Especially with the buried engines, access to the unlock requires a dedicated key. Thus, a BFT motor for the blasting gate doesn't leave you locked in the yard at a power failure.

Rules after mounting a BFT Phobos or Kustos motor

A correct mounting does not stop at the attachment of the motor to the pole. First, the installer sets the race and stop points. Then adjust the force so that the cane stops at contact with an obstacle. In addition, many power plants allow slowing down at the end of the race, useful for heavy leaf. At the same time, at the two-leaved gates, the plant introduces a delay between them, so that it does not hit. In the end, a BFT motor for correctly adjusted swing collars starts lin and stops without shocks.

Power station and accessories

24 V engines need a compatible power plant, such as the models of the control stations, For example THALIA or ZARA BT L2. Also, the photocells and flashing light complete the safety part. For information on standards for motorized gates, consult Standardisation Association of Romania. If you want everything in a package, see swing gate kits. In the end, a BFT motor for the swing collars gives good results only with correct force adjustments.

Frequently asked questions: BFT motor for battling

Do I need two motors for a two-leaved gate?

Yeah, every leaf gets its own BFT motor for battling. Then only one power plant controls both motors.

What motor do I choose for the three-meter leaf?

Search for a BFT motor for battant claws with a maximum length of more than 3 meters, such as Eli Veloce AC A35 or Athos AC A40 AR. However, check the weight of the cane.

Can I hide the engine completely?

Yes, by means of sub-BT or ELI VELOCE buried engines, mounted under the leaf.

The right engine goes on the left-hand side too?

Not always, because some models, like Athos AC A25 AR, come in the right version. Therefore, check the direction of each motor in command.

Compare all models in category swing gates motors, after the length and weight of the leaves. The BFT Store team helps you choose the BFT engine for your poles and gates.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).