
Automatic retractable column kit: Pillar B or Stoppy from BFT
An automatic retractable column kit groups one or more BFT columns of the same model, ready to be mounted on the same entry. It matters because all units have the same shares and the same mode of action, and the choice between Pillar B and Stoppy becomes clearer.
In short: Pillar B is 273 mm in diameter and hydraulic drive, and Stoppy comes in 114, 194 or 219 mm, in sets of 1–4 identical columns.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
The correct choice starts from the width of the input, the type of vehicles and the desired behaviour at the current. Pillar B covers the required accesses, with a diameter of 273 mm and a wall of 6 or 10 mm, and Stoppy brings compact or architectural variations. A kit with identical units simplifies assembly and maintenance. See all BFT kits in the retractable column kits category and ask team advice before the project.
An automatic retractable column kit groups one or more BFT columns of the same model into one control. Thus, the choice becomes simpler, and all units on the same entrance have the same dimensions. We then compare the Pillar B and Stoppy series from the BFT Store offer, starting from the quotas in the technical sheets.
What an automatic retractable column kit means
Basically, the column goes up and down to command and is buried on the road. When it's lifted, it blocks the passage of vehicles. When it goes down, the lid reaches the ground level, and the cars pass over it. On the other hand, pedestrians circulate freely among columns, because the distance between them leaves room for people.
The difference from a column purchased separately keeps the number. Category Retractable column kits find variants of 1, 2, 3 or 4 identical columns. Therefore, an automatic retractable column kit matches when you already know the width of the entry and how many locking points you need.
Pillar B series: diameter 273 mm for required inputs
The Pillar B series uses a cylinder with a diameter of 273 mm and hydraulic drive at 230 V. In addition, you find two heights, 600 mm and 800 mm. Model Pillar B 275/800.10C L SD in kit with 2 pillars It is 800 mm high and has a wall of 10 mm. At the same time, the cap receives LED light and 100 mm reflective adhesive tape.
Wall thickness: 6 mm or 10 mm
The thickness of the wall says a lot about the destination of the column. The 10-mm version is aimed at the entrances where impact matters more. Instead, the 6 mm version, such as Pillar B 275/600.6C L SD, It covers a lot of commercial access. However, the actual level of protection determines the project, not just the thickness of the table. Therefore, an automatic retractable column kit from the Pillar series is chosen after the entry analysis, not after appearance.
Stoppy Series: automatic compact retractable billar kit
Stoppy B 200/700 has a diameter of 194 mm, a height of 700 mm and a wall of 6 mm. The manufacturer indicates a 9-second lift or descent time. Also, the body of the galvanized steel and the reflective sticker help the night visibility. You find him as Kit with a Stoppy B 200/700 billar or in the four-column version.
For areas where the appearance matters, Stoppy MBB 219/500 brings a redesigned floor flank and LED cap. Moreover, this model uses electromechanical action at 230 Vac. At the opposite pole, Stoppy B 115/500 is only 114 mm in diameter and 490 mm in height. Thus, the kit with 4 cylinders Stoppy B 115/500 delineate discrete alle or pedestrian areas. In this case, a compact automatic retractable column kit retains the clean appearance of the pavement.
How many units include the right automatic retractable columns kit
The number of columns depends on the width of the access and the vehicles you want to stop. First, measure the free opening between edges or walls. Then share the width so that a car doesn't fit between two columns. As a rule, an automatic retractable column kit with 2 or 3 units covers a courtyard or parking entrance.
- For a narrow band, like a service ramp, a column arrives.
- Two columns close a regular parking entrance.
- Three units are suitable for wider access or central border.
- Four columns delineate long pedestrian areas.
Mounting an automatic retractable columns kit
Any retractable column lies in a buried foundation box. The Stoppy B sheet describes the assembly on layers of gravel and sand, as instructed by the manufacturer. Therefore, drainage matters enormously, because the water collected in the pit affects the mechanism. Plus, you need a cable tube up to the command board. At the same time, check whether pipelines or underground networks are passing under entry.
An automatic retractable column kit with several units requires aligned holes and identical quotes. Thus, all the helmets reach the same level as the pavement. We recommend an experienced installer on BFT hydraulic or electromechanical systems.
What's going on in a power failure?
The behavior at the drop of the voltage differs from one version to another. For example, the Pillar B 275/800.10C L SD card shows that the pillar remains high when the current is missing. Instead, other Pillar variants automatically descend in the same situation. Therefore, choose the version after priority: blocking access or free passage of intervention vehicles. For this detail, request the exact form of the model before ordering an automatic retractable column kit.
Traffic safety for a retractable column kit system
A raised column becomes a fixed obstacle for drivers. For this reason, LEDs in the lid and reflective tape play an important role. It is also worth adding light, photocell or magnetic loop where many drivers are travelling. However, for public roads or sensitive areas, the final solution shall be established after the project, risk analysis and the requirements of the authorities. The general legal framework you find National legislative portal. In conclusion, an automatic retractable column kit works safely only together with a clear signal.
If you prefer to combine the ingredients alone, see and Automatic columns sold individually. For areas without car traffic, Fixed columns BFT Ranch complete the protection line without mechanism.
Frequently asked questions about automatic retractable column kit
Can I command the remote control columns?
Yeah, command usually comes through the radio receiver, access reader or button. However, the exact configuration depends on the chosen power station.
What is the difference between Pillar and Stoppy?
Pillar B has 273 mm diameter and hydraulic action. Instead, Stoppy offers diameters of 114, 194 or 219 mm, for smaller access or urban areas.
How long does it take to lift a Stoppy B 200/700 column?
Manufacturer indicates 9 seconds for opening or closing. Therefore, the model serves the entrances well with moderate traffic.
Compare all options in category Retractable column kits. There you will find each automatic retractable column kit with the exact number of units and quotas. The BFT Store team helps you choose the right series for your entry.













