
BFT kit for sliding collars: how to choose between DEIMOS models
A BFT kit for sliding in the DEIMOS range brings together the engine, the central and the basic accessories. The variants differ by weight of the portion, type of limiter, engine voltage and connectivity. If you understand the codes, quickly choose the right model for your court or headquarters.
In short: choose from the weight of the portion (400, 600 or 800 kg), limiter, 24 V or 230 V, daily traffic and the need for control of the application.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
The choice of the kit starts from the weight of the portion and continues with the rate of use. DEIMOS A400 covers the usual doors of the house, A600 brings reserve for heavier gates, and AC A800 takes the gates of 800 kg. The ULTRA variants add magnetic limiter and U.link compatibility. A BFT kit for well-chosen stilts works quietly years in a row. Compare the category kits and ask for team advice before ordering.
A BFT kit for sliding collars puts the engine, central and basic accessories in one control. Category Sliding automation kits, all variants belong to the family DEIMOS. The differences between them seem small on paper. However, they matter a lot in everyday use. Below, we take them at a time, with examples of technical records.
DEIMOS Codes for a BFT kit for sliding
The code has three useful parts. First, the figure shows the maximum weight of the portion: 400, 600 or 800 kg. Then, the BT letters indicate 24 V motor, and AC indicates 230 V motor. Finally, the ULTRA suffix marks the version with magnetic limiter and U.link compatibility.
- DEIMOS A400 PL: 400 kg, 24 V, electromechanical limiter.
- Version DEIMOS A400 BT: 400 kg, 24 V, mechanical limiter.
- Model DEIMOS A400 ULTRA BT: 400 kg, 24 V, magnetic limiter and intense traffic.
- Range A600 and A800 climbs at gates of 600 and 800 kg.
Thus, a BFT kit for sliding collars is chosen first after the actual weight of the gate.
How to estimate the weight of the portion
Few owners know exactly how much it weighs. However, you can estimate the profiles used and the filling. For example, a gate with a full board weighs more than one with a rare layer. In addition, a self-supporting gate also has a lower beam that adds weight.
Therefore, choose a BFT kit for sliding with a reserve against the estimate. If the gate is about 400 kg, you're going up to the A600 class. In other words, the engine doesn't work at the limit in every cycle.
Race limiter: Electromechanical, mechanical or magnetic
The limiter shuts down exactly at the ends of the race, without hitting the stops.DEIMOS A400 PL uses electromechanical limiter. Instead, A400 BT, BT A600 and AC variants use mechanical limiter. The ULTRA variants pass to the magnetic limiter.
The magnetic limiter works without physical contact with the cam. In other words, wear is falling, and the adjustment remains stable over time. Therefore, a BFT kit for ULTRA sliding collars matches the often used gates.
BFT kits for 24 V or 230 V sliding gates
Most kits work at 24 V, with 230 V power supply. The 24 V engine provides line start and slowing down. 24V power plants also usually accept backup batteries. On the other hand, DEIMOS AC A600 and DEIMOS AC A800 use 230 V motors.
AC models have robust construction and work well with heavy gates. Thus, a BFT kit for 800 kg sliding collars appears in the store as DEIMOS AC A800. At the same time, the choice of tension depends on the distance to the painting and the daily traffic.
Speed and time of opening
The data sheets indicate a speed of 12 m/min for the DEIMOS range. In other words, he travels a meter in about five seconds. For example, a gate with an opening of 5 meters opens in about 25 seconds. Therefore, in long distances it is worth programming a partial opening for pedestrians.
Pedestrian opening pulls out just as a person passes. Thus, a BFT kit for sliding claws saves time and reduces wear. Also, the gate stays open for less time, so the court is better protected.
Control station and U.link connectivity
The A400 PL and A400 BT kits use the Hamal 400 power station. Instead, DEIMOS A400 ULTRA BT It's coming with the Merak 400 power plant. The ULTRA variants work with the EBA wifi module through the U.link protocol. At the same time, with the added module, the app's gate controls.
Therefore, choose a BFT kit for ULTRA sliding collars if you want control of your phone. For the rest of the kits, the control remains remote control, button or selector.
Rack gear and mounting of a BFT kit for sliding gate
The engine trains the gates through a pinion and a rack gear. A BFT kit for sliding gate does not always include rack gear, so check the list of components in the product file. Find the pieces separately in the category Gear racks. At the same time, you need a well leveled foundation board.
- Fix the foundation plate parallel to the gate.
- Mount rack gear with a small game to pinion.
- Set the limiters to the race heads.
- Test the force and reverse the obstacle.
The cards shall indicate for each BFT kit the degree of protection IP24. That's why he's setting the engine up on a high plate, safe from batons.
What you add to a BFT kit for sliding collars
A BFT kit for sliding collars covers the base, but more kitchens require a few protections. For example, the photocells on the gate line stop closing at the obstacle. In addition, a sensitive margin on the leaf reduces the impact force. For a separate motor, see motors sliding gates. At the same time, a flashing light announces the move of the gate to the street.
The safety requirements for automatic gates come from European standards. Find the national body on the site ASRO. Therefore, it requires a installer who knows these rules and checks the impact forces after assembly.
Frequently asked questions: BFT kit for backresting collars
Which kit do I choose for a 500-pound gate?
For 500 kg, choose a BFT kit for sliding gate in class A600, for example DEIMOS BT A600. Thus, you keep a reserve of force. At the same time, a heavy gate deserves a model for intensive use.
Does the kit include rack gear?
Not always. Therefore, check the list of components in the kit sheet.
Fits a BFT kit for sliding collars on a self-supporting collar?
Yes, a BFT kit for deep-sea DEIMOS is also working on the gated cantilever. However, check the place where the rack is held.
Can I use remote controls from another BFT kit?
Usually, yes, if the receiver accepts their encoding. However, check the compatibility before.
Compare variants of Sliding automation kits. The BFT Store team helps you to choose a BFT kit for sliding collars according to the weight of your gates and traffic.













