
BFT kit for battant collars: how to read the card before ordering
A BFT kit for battant gates brings together the engines, central and basic accessories for a two-leaved gate. The name of each kit shows the length of the cane, weight and tension. If you know how to read these data, quickly compare the models and avoid a too weak motor.
In short: check the length and weight of each leaf, the voltage (AC or BT), the cycle time and the frequency of use of the sheet.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A well-chosen kit starts from correct measurements: the length of each leaf, weight and number of passes per day. E5 and ORO cover small gates, ATHOS, PHOBOS and KUSTOS serve the gates of the house, and ATHOS A40, PHOBOS B40 and B50 take over the long booths. A BFT kit for battling claws saves you from separate controlled parts, and the remote controls or the second pair of photocells complete the system. Compare the variants in the category and ask for help from the team.
A BFT kit for battant claws gathers the engines, the central and the basic accessories in one control. The name of each kit already says a lot: length of the cane, weight and tension. Category Swing automation kits You find variations from 1.2 to 5 meters. Below, we learn to read these data and compare them correctly. At the same time, see what accessories are worth adding after assembly.
How to read the name of a BFT kit for batting collars
Take as an example the PHOBOS AC B25 kit, 2x2.5 meters, 400 kg, 230 V. First, the first group shows two leaves, each up to 2.5 meters. Then the weight shows the limit for the leaf. Finally, the voltage indicates the power supply of the engines.
- AC letters mark 230 V motors.
- The BT code indicates 24 V operation.
- Figures 25, 40 or 50 are linked to the maximum length of the cane.
Thus, a BFT kit for 40-digit swing collars serves leaves up to 4 meters.
Kits for small gates and pedestrian gates
For small gates, range starts with E5 BT A18. The kit covers a leaf of 1.8 meters and 100 kg at 24 V. It also has an opening angle of 130 degrees and IP44 protection. Version E5 BT A12 serves 1.2 meters and 80 kg pedestrian gates.
Also, ORO KIT uses irreversible hydraulic operators for 1.8 meters and 180 kg leaf. The cycle takes 20 seconds, and the angle reaches 112 degrees. Therefore, a BFT kit for compact swing collars fits small courtyards. Especially at pedestrian gates, it counts a short cycle and a smooth move.
BFT kit for home-cooked knives
Most of the gates were 2–2.5 metres. Here, however, the choice becomes wider. ATHOS AC A25 covers 2.5 metres and 350 kg at 230 V. The manufacturer uses cast aluminium under pressure, the bolt and the bronze crown. In contrast, VIRGO covers 2 meters and 200 kg, 24 V, with display on the board.
For the same length of 2.5 metres and PHOBOS AC B25, PHOBOS BT B25 and KUSTOS BT B25. All three are up to 400 kg. However, the difference comes from voltage, speed and frequency of use.
Speed and frequency of use
In a BFT kit for battant claws, cycle time tells you how much you wait for the claws. Here are the 2.5-meter model cards:
- PHOBOS AC B25 opens in 18 seconds and supports 30 actions per hour.
- The PHOBOS BT B25 version comes down at 13 seconds, with intensive use.
- KUSTOS BT B25 reaches 12 seconds, all for intensive use.
In other words, 24 V models work faster and support multiple cycles. However, for a house with a few passes a day, and the 230 V version faces. So, you choose by family habits and by number of cars. For example, a family with three cars opens doors many times a day.
BFT kits for large swing gates
For long leaf, a BFT kit for batantal claws climbs to 4 and 5 meters. ATHOS AC A40 covers 4 meters and 400 kg at 230 V. Also, PHOBOS BT B40 leads leaves of 4 meters, at 24 V, with angles of 130 degrees. At the same time, PHOBOS AC B50 reaches 5 meters and 500 kg, with IPX4 protection.
Therefore, the large gates demand solid and hinge pillars in good condition. In addition, a long leaf catches a lot of wind, so it also counts the shape of the gates.
Hydraulic version LUX MB
LUX MB KIT uses a linear hydraulic motor, for leaves of 2.3 meters and 300 kg. In addition, the kit has hydraulic locking, end-of-race limiter and control unit. Thus, a BFT kit for hydraulic rod gate holds firm gate in the closed position. On the other hand, the hydraulic assembly requires precise quotes.
Common mistakes in choosing the kit
A few errors often occur when you choose a BFT kit for swing gate:
- Measurement of the whole gate instead of each leaf.
- Estimation of weight without taking into account the board or the massive wood.
- Ignore the frequency of use at gates with many passages.
- Mounting on building pillars without solid grip plates.
Therefore, note the data of the gates before ordering. In addition, take a few pictures of the poles and swings for the sales team.
What else do you add to a BFT kit for batting
A BFT kit for the swing gate covers the base, but each gate has its own needs. For example, a second pair of photocells protects the turning area. At the same time, the additional remote controls can be found at remote radio controls. To replace a single motor, see swing gates motors.
Then add a flashing light, if the kit does not include it. In addition, the safety of automatic ports is subject to European standards. Find the national standardisation body on the site ASRO. Therefore, it requires the assembly of a plumber who knows these requirements.
Frequently Asked Questions: BFT Kit for Battant Gates
What does the kit include?
The composition of a BFT kit for swing collars differs from one model to another. Therefore, check the list in the product file.
Can I use a kit on a one-leaf gate?
Yeah, but it's still an unused motor. In this case, a separate motor with a power plant becomes more practical.
Which BFT kit do I choose for 3 meters?
In this case, choose a BFT kit for swing collars designed for 4 meters leaf, such as ATHOS AC A40 or PHOBOS BT B40. However, check the actual weight.
Is the power-out kit working?
The 24 V models usually accept a backup battery through the power plant. However, check the option in each kit file.
Compare all variants of Swing automation kits. The BFT Store team helps you choose a BFT kit for the swing collars according to your leaves, weights and pace of use.













