
Complete BFT barrier kit: how to choose after crossing and traffic
A complete BFT barrier kit brings together the body of the barrier and the right arm, in one command. The shop has kits with arms from 3 to 7 meters, from MOOVI and GIOTTO for small parking lots to MAXIMA ULTRA for intense traffic. The choice starts from the width of the pass.
In short: measure the passage, choose the length of the arm, then the model after traffic, speed, power supply and the necessary safety accessories.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
Each entry has another width and another pace of passage. MOOVI 30S and GIOTTO BT A 30S cover parking with 3 meters passes, MICHELANGELO and MAXIMA ULTRA 36 XL rise to 6 meters, and MAXIMA ULTRA 68 SM reaches 7 meters. A complete BFT barrier kit exempts you from compatibility calculations. Photocells, magnetic loop and light on the arm then complete the system. Compare the category kits and ask for team advice for accessories.
A complete BFT barrier kit gathers the body of the barrier and the right length arm in one control. Thus, you no longer look for compatible parts separately. Category Barrier kits, each name shows the pattern and length of the arm. Below, we explain how you choose from the usage scenario: parking, company location or access road.
What a complete BFT barrier kit means
The name of each kit calls the body and arm. For example, the MAXIMA ULTRA 35 SM + ASS SPRING kit with a 5 metre arm includes the set of arc indicated in the name. Instead, the MAXIMA 60 kit appears with an arm of 5 meters. At the same time, the exact composition confirms it in the product file.
Therefore, a full BFT barrier kit starts from the length of the pass, not from the preferred model.
Length of arm after width of passage
The store has kits with arms of 3, 4, 5, 6 and 7 meters. Here are some concrete examples:
- GIOTTO BT A 30S, MOOVI 30S and MAXIMA ULTRA 36 wine with 3 meters arm.
- The MAXIMA ULTRA 35 SM kit appears with arms of 3, 4 or 5 meters.
- For 6 meters of the MICHELANGELO BT A 60 U and MAXIMA Ultra 36 XL.
- The MAXIMA ULTRA 68 SM version reaches 7 meters.
So, measure the width of the band and choose a BFT barrier kit complete with the next arm as length.
Block or office parking
At a parking lot with controlled access, it counts speed and reliability. For example, MOOVI 30S kit has 230 V motor and 1.5 seconds opening time. Instead, kit GIOTTO BT A 30S work with 24 V motor, for passage up to 3 meters. Both variants correspond to single-band inputs and a moderate number of times per hour.
Therefore, a full BFT barrier kit of 3 metres covers most residential parking lots. At the same time, add remote controllers or card readers for the tenants.
Opening speed and power supply
Kits differ and by the time they lift the arm. For example, MOOVI 30S climbs the arm in about 1.5 seconds, then slows down at the end. MICHELANGELO kit BT A 60 U It takes about 6 seconds for the arm 6 meters. In other words, the long arm moves slower, for stability. At the same time, BT models work at 24 V and MOOVI at 230 V. Therefore, a complete BFT barrier kit is also chosen after the desired pace of passage.
BFT automatic barrier kit for intensive traffic
Commercial parking and access roads have a different pace. Here, the MAXIMA ULTRA range uses three-phase motor, according to the almost continuous operation. In other words, the barrier supports very dense cycles. The manufacturer shall indicate the series for areas with frequent reversals of movement.
For example, a complete BFT barrier kit MAXIMA ULTRA 68 SM with 7 meters arm serve wide entrances, with heavy traffic. On the other hand, MAXIMA ULTRA 36 XL with a 6 metre arm matches large parking lots.
Access roads and traffic management
Some kits appear in the store as street barriers, to drive the traffic. For example, MAXIMA ULTRA 35 SM with 4 meters arm or MAXIMA ULTRA 68 SM with arm of 6 meters. However, a barrier on a public road requires approval and signaling to conform. Information about traffic rules found on the website Romanian Police.
Therefore, the final solution for a full BFT barrier kit on the public road results from the project and from the requirements of the authorities.
Accessories that complete the kit
Even a complete kit usually receives a few accessories. The photocells stop the arm from coming down over a person or over a bicycle. At the same time, the magnetic loop and detectors I keep the barrier high while the car is under my arm. Parts for the arm, like the supports, you find them in mechanical accessories.
- The light on the arm increases visibility at night.
- A traffic light directs the order of entry with two senses.
- The card reader limits access to authorized persons.
Thus, a complete BFT barrier kit becomes an access control system.
Separate body or full BFT barrier kit
The separate body helps when you replace an old barrier and keep your arm. See models in Barrier bodies. Instead, the kit simplifies a new project because the arm comes right with the body. So, you choose after you already have the entrance.
Common errors in complete BFT barrier kits
- The arm chosen exactly at the width of the band, without reserve for mounting.
- A slow model mounted at a very dense passageway.
- The magnetic loop was missing at the parking lot where the cars are under the arm.
- The Foundation poured without pipes for cables.
In conclusion, a complete BFT barrier kit works well only if you match it to the actual input.
Assembly and commissioning
First, you concrete the foundation board and pass the cables through the tubes. Then fix the body, mount the arm and adjust the balance of the arc. In the end, you schedule the race, the slow-downs and the safety accessories. At the same time, you train the staff who use the barrier and establish who does the periodic checks.
Frequently Asked Questions about BFT Barrier Kit Complete
What kit do I choose for a four-meter entrance?
Choose the MAXIMA ULTRA 35 SM kit with a 4 metre arm. However, check the lateral space for the body.
Does the kit include photocells?
The composition differs from one kit to another, especially to safety accessories. Therefore, check the list in the product file.
Can I then change the arm to a full BFT barrier kit?
Only within the range accepted by the body. For example, the MAXIMA ULTRA 35 SM body works with arms of 1.7–5 meters. However, a longer arm asks and rebalancing the arc.
Compare all variants of Barrier kits. The BFT Store team helps you choose a complete BFT barrier kit according to the passage, traffic and accessories you need.













