
LED light for barriers: BFT kits for arms 3, 4.5 and 5 meters
LED light for barrier makes the arm visible at night, on fog or in underground parking. The driver has been observing that the passage is closing and reducing speed. BFT kits are mounted on the arm of the barrier and differ after the length of the arm, number of lights and colors displayed.
In short: choose the kit after the type and length of the arm, from 3 to 5 meters, then check if the barrier requires an additional control plate.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A bright arm communicates clearly the state of the barrier, especially at night. KIT LIGHT covers 3–4,5 m arms, ATM LIGHT offers red-green for 3 or 5 m ATM arms, and MCL LIGHT KIT brings 6 lights with dedicated plate. Always check compatibility with the arm and body of the barrier. Check and order plate requested by the kit. Now choose LED lighting for barriers in the category of electrical accessories, and the BFT Store team helps you choose.
LED light for barrier turns the arm into a visible signal from a distance. Daytime, reflective tapes usually arrive. However, at night, in the rain or in an underground parking lot, the active light makes the difference. Therefore, many new installations include from the beginning a kit of lights on the arm.
Category Electrical accessories Find four BFT kits. They differ as covered lengths, number of lights and colors. Below we compare them and explain how you choose correctly.
Why does LED lighting matter for barriers
A barrier arm stands perpendicular to the walk direction, so the driver sees it from the front, on a small width. Without active light, the arm can become hard to observe in the dark. In addition, LEDs consume little and start instantly.
- The driver observes the arm from a greater distance.
- The red and green colors indicate the state of the passage without other panels.
- The intermittent light warns that the arm is moving.
- The nearby pedestrians understand the danger zone more easily.
Therefore, LED lighting for barriers completes reflective strips, does not replace them.
KIT LIGHT: led lighting for barrier with 3–4,5 meters arms
Version BFT KIT LIGHT Address arms between 3 and 4.5 metres in length. This is why most entrances to residential or office parks are matched. The kit is a simple LED lighting solution for the barrier without additional traffic light functions.
ATM LIGHT: LED light for barrier, red and green
The ATM LIGHT kits display two colors, red and green, with a power of 2 W. Thus, the arm also works as a small light.
- Model KIT ATM LIGHT 3 R/G 2W Covers ATM arms up to 3 meters.
- Version KIT ATM LIGHT 5 R/G 2W Cover ATM arms up to 5 meters.
Attention to the name of the arm. The ATM kit matches the arms of the ATM series, such as BFT ATM30 arm. Moreover, the manufacturer states that this arm does not include lights. Therefore, on an ATM30 arm you need LED lighting for separate barriers.
When you choose red-green
The two-color signal helps where many vehicles pass, for example when leaving a public parking lot. The driver sees directly if he can pass. Instead, in a private yard, a led lighting for simple barriers arrives most times.
MCL LIGHT KIT: six lights and dedicated plaque
Kit BFT MCL LIGHT KIT bring six lights on the arm of the barrier. Thus, LED lighting for the barrier covers the length of the arm more evenly. The manufacturer shall indicate it for use with the PCA. At the same time, the kit requires the MCL CARD KIT board for operation. In other words, before you order, check if your barrier has or accepts this plate. Therefore, MCL LIGHT KIT matches the planned installations from the beginning with this board. On the other hand, at an existing barrier, first check the space and connections in the body.
How to choose LED lighting for correct barrier
First, identify the exact pattern of the arm, not just its length. Then check the body of the barrier and the control center. Later, decide whether LED lighting for the barrier should be simple or red-green.
- Write down the series of the arm: ATM, AT, AQ or BOOM PS.
- Measure the actual length of the arm mounted.
- Look in the barrier file for lights and the required plate.
- Sets whether the intersection needs traffic light colors.
For example, for MAXIMA ULTRA 36 barriers, BFT also offers Crown RGB cap with built-in lights. It fills the light on the arm, but does not replace it. See and mechanical accessories for arms and fastening systems.
Assembly and safety in traffic
The LED light kit for the barrier shall be attached to the arm and connected to the barrier centre, as per the manufacturer's schedule. Because the arm moves at each cycle, the cable must have a reserve at the pivot. At the same time, check periodically if all the LEDs are on. It also replaces damaged segments in time, so that the signal remains continuous.
On public roads and open parking spaces, the signal shall be established after the project and the requirements of the authorities. General information about road safety can be found on the website Romanian Police. For compatible barrier bodies, see and Barrier bodies.
Scenarios for use for LED lighting for barriers
Each location has other visibility conditions. That's why the right kit depends on context, not just the arm.
Underground parking. Here the natural light is completely missing. Therefore, LED lighting for the barrier becomes almost indispensable for comfort and safety. A red-green kit also helps guide drivers to exit, where the ramp reduces visibility.
Entry into the industrial yard. At a truck entrance, the arm is often 5 meters long. Thus, the KIT ATM LIGHT 5 R/G 2W version covers ATM arms of this length. In addition, heavy vehicle drivers see the signal from a greater distance. However, the exact combination shall be established after the proposed circulation of the premises.
Block of dwellings or offices. Traffic remains moderate, and arms are usually 3–4.5 metres long. For example, KIT LIGHT offers a simple solution, without a traffic light. In other words, the tenants see the arm at night, with an easy installation.
On the other hand, at a public parking lot with payment it is worth taking into account MCL LIGHT KIT, with six lights. Thus, LED lighting for barrier covers the whole arm evenly.
Frequently Asked Questions about LED Lighting for Barriers
Can I mount a light kit on an existing arm?
Yes, if the arm is part of the kit compatible series. Check the length as well, because each kit covers a precise interval.
Does MCL LIGHT KIT work without additional plate?
No, no. The manufacturer mentions that MCL CARD KIT must exist for operation.
Does the light replace the reflective tapes?
No, no. The bands remain useful as a passive reserve, especially when the current is missing.
Find all kits in category Electrical accessories and choose LED lighting for barriers after the series and length of the arm. The BFT Store team helps you check compatibility with your barrier.













