
BFT adjustable photocells: angles, radius and correct mounting
Choose BFT adjustable photocells when you want the gates to stop or reverse at any obstacle. The adjustable head allows you to align the pair even on non-frontal pillars. Thus, protection remains active at swing gates, sliding, garage doors or barriers.
In short: choose after radius (20 or 30 m), the angle of adjustment, feeding and wiring, then mount the pair to the correct height and test it.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A well-chosen and well-aligned pair reduces the risk of the claws touching a car or a person. AKTA A30 and COMPACTA A20-180 solves non-aligned pillars, THEA takes over fine mountings, ERIS removes the cable, and COMPACTA-PHP brings its own pillars. With BFT adjustable photocells, the subsequent corrections take a little while, and the monthly test will quickly show you if the pair sees it right again. Compare safety camera sets and ask team advice.
The mounting with BFT adjustable photocells solves a common problem: the poles are not perfectly aligned. Thanks to the adjustable head, you rotate the beam to the receiver without moving the support. Therefore, the installer gains time and protection becomes more reliable. In addition, you can correct alignment anytime, if the pole moves over time.
Working principle in adjustable BFT photocells
The pair includes a transmitter and a receiver. The emitter sends an infrared beam, and the receiver continuously follows it. When a car or a person interrupts the beam, the power station receives signal. Then the automation stops the movement or reverses the meaning after programming.
However, the mounting with BFT adjustable photocells does not replace other protections. For example, automatic gates still use sensitive margins and power limitation in the power plant. In other words, the photocell is a layer of the safety system, not the whole system.
Adjusting angles: differentiating patterns
The difference between models is especially how much you rotate your head. Here's the data in the category Safety photocells:
- AKTA A30 shall be adjusted 180° horizontally and 20° vertically.
- COMPACTA A20-180 Rotate 180° horizontally, with a radius of 20 m.
- THEA A15 O.PF orientates the 40° horizontal and 10° vertical beam.
- ERIS A30 offers all 180° horizontal and 20° vertical, without wire between pairs.
So, you choose BFT adjustable photocells at 180° when the poles are staggered. For example, BFT AKTA A30 set Covers the most uncomfortable mountings. Instead, THEA matches the closely aligned pillars, where fine adjustment matters. On the other hand, THEA requires a closer alignment to the assembly.
Radius and feed to adjustable BFT photocells
Most models are 30 m wide and work at 24 V ac/dc. However, COMPACTA A20-180 has 20 m and accepts 12–33 Vac or 15–35 Vdc. Thus, BFT adjustable photocells of this type are easily integrated into the brand's power stations.
The nominal radius does not mean the ideal working distance. For example, at a distance of 5 meters, a 20 m radius leaves a comfortable reserve for fog, dust or rain. Therefore, the maximum range is particularly important at very wide entrances or double barriers.
Special models: wireless, universal and self-alignment
Some sets solve special situations. For example, BFT ERIS A30 work wirelessly and may administer a safety margin with STR, BIR C or BAR C profiles. So avoid digging for cable across the alley.
On the other hand, THEA A15 O.PF UNI the non-BFT automations are also appropriate. It also has built-in intermittent light and synchronized signal, which prevents accidental blindness. The DESME A15 option is automatically aligned over a radius of 30 m. In this case, choose between BFT adjustable photocells and a model that finds its own pair.
BFT adjustable photocells on aluminium pillars
Sometimes you don't have where to fix the photocells, especially the long sliding gates. In that case, BFT COMPACTA-PHP kit bring two 522 mm aluminum poles. The set also includes the COMPACTA A20-180 pair. Therefore, you receive BFT adjustable photocells ready to mount on the edge of the alley.
Where you mount the pair, after the type of automation
The position differs from one automation to another because each has another risk area. Here are some practical highlights:
- At the back of the neck, the pair sits on the gate line, at the exit of the yard.
- The gates are asking for a pair on the outside and, ideally, one in the turning area.
- Door garage gets the pair right in the void, close to the ground.
- Barriers use the pair under the arm, on the passing direction.
Then complete the system with a signalling lamp, announcing the move. Thus, BFT adjustable photocells and lamp work together for a safer passage.
Assembly of a BFT photocell set, step by step
- Fix the pair to 40–60 cm of ground, to detect a car down.
- Align the transmitter and receiver until the signal LED confirms the reception.
- Test with an object that interrupts the beam during closure.
- Regularly clean the dust lenses, spider cloths and snow.
Frequent errors in mounting
A few errors occur often at the assembly with BFT adjustable photocells, even at attentive installers. You can easily avoid them if you know of them:
- The pair mounted too high doesn't see a low car or a bicycle.
- The sun-oriented emitter can give false alarms in the morning.
- The cable without a protective tube gives in time to the wet.
- The absence of the test after assembly leaves the defects undiscovered.
In conclusion, a properly assembled pair gives you constant protection, without unnecessary stops.
Maintenance of safety photocells
A dirty or disaligned photocell may leave a door closed over an obstacle. Therefore, check the monthly operation, especially after storms. The rotary head helps here because it allows corrections without dismantling. So, BFT adjustable photocells return easily to position after a shock. Subsequently, note the date of verification in a simple log. The general requirements for automatic gates meet European standards, available through ASRO.
Frequently Asked Questions about BFT Adjustable Photocells
Can I use BFT photocells on another brand automation?
Yes, especially the THEA A15 O.PF UNI model. However, check the voltage and safety input of the power plant. Then test the stop before use.
How many pairs of photocells do I mount?
Minimum one on the outside. For swing gates, we also recommend a pair inside. Thus, you protect the area where the canadians are rotated.
What do I choose if the pillars don't stand face to face?
Choose BFT adjustable photocells with 180° horizontally, such as AKTA A30 or COMPACTA A20-180.
What ray do I need at the adjustable BFT photocells?
For gated houses, 20 m usually arrive. Instead, very wide entrances require models of 30 m.
Compare all models in category Safety photocells. The BFT Store team helps you choose the right BFT adjustable photocells for your portion, distance and power station.













