Technical advice: 021 450 60 70 · Delivery nationwide · Blog

BFT Store
021 450 60 70 Contact

Installation and service for automation details

Product categories
BFT mass metal detector: how the barrier loop works

Automatic barriers

BFT mass metal detector: how the barrier loop works

A BFT mass metal detector sess the vehicle above a magnetic loop on the roadway. Thus, the barrier does not descend over the car and can be opened automatically upon exit, without remote control. In other words, access to the parking lot becomes more fluid and safer.

Briefly: the SPIRA loop sess the machine and the RME 1 BT (24 V) or RME 2 (230 V, 2 channels) detector sends the command to the barrier.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A loop system reduces the wait at the exit and holds the arm up while the vehicle is under it. Choose RME 1 BT for one loop at 24 V or RME 2 for two loops at 230 V. Then complete with the SPIRA loop 2x1 m and with pedestrian photocells. In addition, a plumber attentive to the position of the loop avoids false signals. You also periodically check the sealing of the asphalt cut. Find a BFT mass metal detector in the category Metal detectors.

A BFT mass metal detector converts a simple loop of asphalt cable into a vehicle sensor. The principle remains simple: the metal mass of the machine modifies the loop field, and the detector observes the change. Then send a contact to the barrier or gate center. Category Metal detectors find three BFT products that work together.

What does a BFT mass metal detector do

The detector performs several functions depending on the position of the loop. For example, a loop in front of the closed barrier commands the opening at exit. At the same time, a loop under the raised arm prevents closing over the vehicle. In addition, after passing, the detector can order the immediate shutdown.

  • Automatic opening, especially for vehicles leaving.
  • Safety: The arm stays up while the car sits on the loop.
  • Quick lock after the vehicle clears the area.
  • Signal for other equipment, through exit contacts.

Therefore, a BFT mass metal detector works as a ‘strictly vehicle-oriented eye.

RME 1 BT or RME 2: Differences

The BFT Store range includes two detectors. For example, BFT RME 1 BT has a channel and is powered at 24 V. Therefore, you choose it when you have a 24 V feed, frequent at the GIOTTO or MICHELANGELO barriers. Instead, BFT RME 2 has two channels and works at 230 V.

A BFT mass metal detector with two channels reads two separate loops. Thus, one loop commands the opening, and the other ensures safety under the arm. Depending on the configuration, the two channels can also serve other traffic logics.

How a BFT loop detector works

The loop forms, together with the detector, an oscillating circuit. When a car passes over, the frequency of the circuit changes. The detector continuously compares this value with the reference value. Then, if the difference exceeds the regulated threshold, close the exit relay. Thus, the barrier receives a simple, contact-like signal. At the same time, the RME detector adapts slowly to temperature changes to avoid false alarms.

Magnetic loop SPIRA 2x1 m

The detector doesn't work without a loop. BFT SPIRA loop It has a size of 2x1 m, suitable for a regular access strip. First, the installer cuts a narrow ditch into asphalt or concrete. Then loop, bind it to the detector and seal the cut.

However, the position counts enormously. The loop is at a distance from moving metal parts and power cables. Otherwise, a BFT mass metal detector may receive false signals.

Bugs on the loop assembly for the RME detector

  • Too little deep ditch leaves the loop exposed to wear.
  • The binding cable, unscathed, takes on interference.
  • Next to a moving metal gate, the loop "sees and gates.
  • Weak sealing allows water to enter the cut.

Therefore, we recommend that the assembly be made a plumber with experience in barriers. Thus, the BFT loop detector receives a clean signal from the beginning.

Examples of configuration with RME detector

A single-band company parking lot usually uses a safety loop under your arm. In this case, RME 1 BT covers the need, if the barrier offers 24 V. On the other hand, a parking lot with free exit requires an extra loop before the barrier. Therefore, RME 2 with two channels manages both loops.

At the same time, at a two-band entrance, you mount one detector on each tape. Thus, each barrier only reacts to vehicles on its belt. In other words, a BFT mass metal detector is chosen after the number of loops and bands.

Where you mount a BFT mass metal detector

The detector usually sits in the barrier housing or in an electric box next to it. For example, the body BFT MAXIMA 30 matches areas with frequent transit. There, loop reduces waiting time at exit. At the same time, the box remains accessible for further adjustment.

For a complete barrier, see and Barrier kits, where the body, arm and accessories come together. In addition, safety on the movement zone is complemented by Safety photocells.

The RME detector or the camera?

The two are not excluded. For example, the photocell sees any obstacle in the beam, including pedestrians. Instead, the loop reacts only to large metal masses, i.e. to vehicles. Therefore, their combination better covers the barrier area.

Regulation and verification

After assembly, the RME detector learns the free loop state. Then you adjust the sensitivity, so you can see the cars. You also test the closure with a car stopped on the loop. The arm must remain up, without exception. Then repeat the test with a small car to confirm the sensitivity.

Rules of movement and accommodation for public open parking appear in the legislation in force. Therefore, the final solution for public access is established after the project and the requirements of the authorities. A BFT mass metal detector completes this project, but does not replace the risk analysis.

Maintenance and service

The buried loop does not require daily maintenance. However, asphalt fissures can damage the cable over time. Therefore, check regularly for the sealing of the cut, especially after winter. You also watch if the barrier stays up for no reason, as it can signal a faulty loop.

Frequently asked questions

Does a BFT mass metal detector work without a loop?

No, no. The detector needs a magnetic loop on the roadway, like SPIRA 2x1 m.

Can I use the detector and a backlit gate?

Yes, because the detector provides simple contact. However, the central gate must accept that entry.

How many loops does the RME detector tie?

RME 1 BT manages one loop, and RME 2 manages two. For more loops, you use more detectors. Thus, each loop has its own channel and its own adjustment.

Choose the right detector and loop from the category Metal detectors. The BFT Store team helps you choose, depending on the barriers, power supply and number of access strips.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).